Heating System Temperature Controller

Mold Temperature Controller Best for Heaing System Good Quality with Best Price

The model has signed on the back of thermostat, the “outside sensor” or the “outside sensor that can be used to protect the heating equipment” should be connected to S1, S2.

Operation Instructions:

Heat and control: When the environment temperature is 0.7ºC lower than the set temperature, the heating load will be connected. The red indicator lamp will turn to green when the temperature is 0.7ºC higher than the set temperature and the heating load will be shut down at the same time.

Overheated protection: Put the sensor into the pipe and put it around the heating body which needs the over-heating protection. When the heating temperature is higher than the overheated protection point temperature (standard temperature point is 50±3ºC, set it as your need).The thermostat will be shut forcefully in case the overheating. When the temperature returns to the 5ºC lower than the protection temperature point, the thermostat will resume work.

ON/OFF: Press the “power button” can turn on or turn off the thermostat. When thermostat power on, the indicator lamp will turn red and the heating load will power on at the same time. When thermostat power off, the indicator lamp will turn green and the heating load will be shut down at the same time.

Mounting:

According to the A801 series thermostats hookup to connect the power supply box with 4mm2 wire, then put the power supply box into the 86*86mm junction box. Mount the wall-plate with two 4*25 screws onto the wall, then mount the control body of A801 series thermostats onto the wall-plate.

Attention:

Due to the compensatory function, one hour later the thermostat will be the optimum condition.

Heating System Temperature Controller